Skylink WT-433W Wireless Door & Window Burglar Alarm Alert Security Sensor | Affordable, Easy to Install DIY Accessory for SC Series Systems

Skylink WT-433W Wireless Door & Window Burglar Alarm Alert Protection Sensor | Reasonably priced, Effortless to Set up DIY Accessory for SC Series Techniques

  • NO Month to month Fees and simple DIY (Do It Your self) installation
  • MONITORS DOORS AND WINDOWS with opened or closed signal
  • WIRELESS – BATTERY POWERED with low battery indication: be informed when the sensor`s battery is lower prior to it stops sending signals
  • COMPATIBILE with SC-10W, SC-100W, SC-1000W systems.
  • LIFETIME Support – Toll cost-free one-800-304-1187, assistance@skylinkhome.com

The Skylink WT-433 Wireless Window/ Door Sensor can be mounted to any door, window and rame with double sided tape to track a door/wiindow opened or closed status. When the standing modifications, an alarm or chime will sound immediately based on the alarm mode. Disarmed = Chime, Armed = Siren. The window/door sensor can also keep track of inner doors that require safety like cabinets and safes. Note: This sensor needs a Skylink SC Security Technique to work this kind of as SC-10W, SC-100W and SC-1000W syst

GET More Details CLICK Right here

Skylink WT-433W Wireless Door & Window Burglar Alarm Alert Security Sensor | Affordable, Effortless to Set up DIY Accessory for SC Series Techniques

3 Responses to Skylink WT-433W Wireless Door & Window Burglar Alarm Alert Security Sensor | Affordable, Easy to Install DIY Accessory for SC Series Systems

  1. tim says:
    11 of 13 people found the following review helpful
    4.0 out of 5 stars
    Works well, November 28, 2011
    By 
    tim

    Verified Purchase(What’s this?)
    This review is from: Skylink WT-433W Wireless Door & Window Burglar Alarm Alert Security Sensor | Affordable, Easy to Install DIY Accessory for SC Series Systems (Tools & Home Improvement)
    It does pretty much what it needs to. It is a little tricky to program this to the rest of the Skylink security sensor correctly. Basically, you need to add this sensor to Zone 1,2,3 or 4. In order to do this you need to enter a code sequence on the main control panel, then press the button on the sensor.

    It is tricky if you mess this up, or if you need to move sensors between zones: in order to remove any sensors from a zone, you need to clear the zone, then add them individually. Once you have the system set up, this means running back and forth between the control panel and the sensors in order to hit the button on the sensor within 30 seconds of programming. If you don’t make it to the sensor within 30 seconds, the zone is cleared. To make matters worse, if you trigger the motion sensor while moving around the house, the sensor is programmed to that zone, and you have to start the process over again. You can’t easily tell which sensors belong to which zone, so you need to keep this straight as you are doing it.

    But aside from that, the product works well, doesn’t seem to trigger any false alarms.

    0

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  2. franky says:
    6 of 6 people found the following review helpful
    5.0 out of 5 stars
    Works great!, March 13, 2012
    By 
    franky

    Verified Purchase(What’s this?)
    This review is from: Skylink WT-433W Wireless Door & Window Burglar Alarm Alert Security Sensor | Affordable, Easy to Install DIY Accessory for SC Series Systems (Tools & Home Improvement)
    I bought this product for self installation. Perfect product, does exactly what it describes, easy to install, easy to read instructions, fast shipment. I have also GE product- does not come close to Skylink. I am glad I found this product thanks to all great reviews. When power fails security system stays on the battery and works for about 3 days. Therefore, no problem despite of power failure.

    0

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  3. Captain Kevin Carney says:
    3 of 3 people found the following review helpful
    3.0 out of 5 stars
    WAIT – Think about buying other Add-ON, January 4, 2013
    By 
    Captain Kevin Carney (Moscow, PA USA) –
    (REAL NAME)
      

    Verified Purchase(What’s this?)
    This review is from: Skylink WT-433W Wireless Door & Window Burglar Alarm Alert Security Sensor | Affordable, Easy to Install DIY Accessory for SC Series Systems (Tools & Home Improvement)
    Please look for the Vibration sensor – I have a review there about it.

    I would recommend the Vibration sensor over this add-on. (again see my review on Vibration sensor)

    My review on this – I bought the kit and a few of these (wish I didn’t now) one of the ones that came in the box didn’t work. I emailed skylink and a woman called me back later that day.

    I have yet to get the replacement (but I am still in the window when she said it might show up)

    She was helpful with replacement – I told her the troubleshooting I did and that ended that (she said ok you covered everything) lets get you a replacement (IF they don’t send a replacement I’ll update my review)

    I really like the system. ( I am using it as a backup to an existing video system )

    HOWEVER – seriously consider getting the Vibration Sensor over this… why
    – if they break glass this sensor won’t go off (vibration – if they open or break it will go off)
    – easy install on vib sensor – peel Velcro and stick
    – battery replacement (9 Volt Battery) on vib – not this one… this is one of those tiny batteries that is a pain to find.

    0

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

Leave a Reply

Your email address will not be published. Required fields are marked *

6 + 12 =